Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SECCIÓN 1
1.0
Precauciones de seguridad
GB
GB
Los usuarios de los equipos de corte y soldadura ESAB tienen la responsabilidad de asegurar que las personas que
trabajan o están cerca del equipo sigan las normas de seguridad.
Las precauciones de seguridad deben estar de acuerdo con equipos de corte y soldadura. Las recomendaciones
Arc welding and cutting can be injurious to yourself and others. Take precausions when welding.
Arc welding and cutting can be injurious to yourself and others. Take precausions when welding.
abajo deben ser seguidas adicionalmente a las normas estándar.
Ask for your employer's safety practices which should be based on manufacturers' hazard data.
Ask for your employer's safety practices which should be based on manufacturers' hazard data.
1. Cualquier persona que utilice un equipo de soldadura o corte plasma debe ser familiar con:
ELECTRIC SHOCK - Can kill
ELECTRIC SHOCK - Can kill
Install and earth the welding unit in accordance with applicable standards.
Install and earth the welding unit in accordance with applicable standards.
S
S
-su operación
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S
S
-localización de los paros de emergencia
Insulate yourself from earth and the workpiece.
Insulate yourself from earth and the workpiece.
S
S
-sus funciones
Ensure your working stance is safe.
Ensure your working stance is safe.
S
S
-precauciones de seguridad
FUMES AND GASES - Can be dangerous to health
FUMES AND GASES - Can be dangerous to health
Keep your head out of the fumes.
Keep your head out of the fumes.
-corte plasma y soldadura
S
S
Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
S
S
and the general area.
and the general area.
ARC RAYS - Can injure eyes and burn skin.
ARC RAYS - Can injure eyes and burn skin.
2. El operador debe asegurar que:
Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
S
S
-ninguna otra persona este en la área de trabajo durante el arranque de la maquina
clothing.
clothing.
Protect bystanders with suitable screens or curtains.
Protect bystanders with suitable screens or curtains.
-ninguna persona este sin protección al momento de la partida del arco
S
S
FIRE HAZARD
FIRE HAZARD
Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
S
S
NOISE - Excessive noise can damage hearing
NOISE - Excessive noise can damage hearing
3. La área de trabajo debe:
Protect your ears. Use earmuffs or other hearing protection.
Protect your ears. Use earmuffs or other hearing protection.
S
S
-estar de acuerdo con el trabajo
Warn bystanders of the risk.
Warn bystanders of the risk.
S
S
-estar libre de corrientes de aire
MALFUNCTION - Call for expert assistance in the event of malfunction.
MALFUNCTION - Call for expert assistance in the event of malfunction.
Read and understand the instruction manual before installing or operating.
Read and understand the instruction manual before installing or operating.
4. Equipo de seguridad individual:
-siempre utilice equipos de seguridad, lentes, prendas ignífugas, guantes, etc.
-no utilice artículos sueltos, como bufandas, pulseras, anillos, etc.
5. Precauciones generales:
WARNING!
WARNING!
-este seguro que el cable de retorno esta bien conectado
Read and understand the instruction manual before installing
Read and understand the instruction manual before installing
-el trabajo con alta voltaje debe ser realizado por un técnico calificado.
or operating.
or operating.
-un extintor de incendios apropiado debe estar acerca de la maquina.
-lubricación de la maquina no debe ser realizada durante la operación.
CAUTION!
CAUTION!
El equipo de clase A (400 V CE) no está diseñado para su uso en
Class A equipment is not intended for use in residential locations where
Class A equipment is not intended for use in residential locations where
ubicaciones residenciales donde la corriente eléctrica se suministra
the electrical power is provided by the public low- -voltage supply
the electrical power is provided by the public low- -voltage supply
mediante el sistema de suministro público de baja tensión. Pueden
system. There may be potential difficulties in ensuring electromagnic
system. There may be potential difficulties in ensuring electromagnic
surgir posibles problemas a la hora de garantizar la compatibilidad
compatibility of class A equipment in those locations, due to conducted
compatibility of class A equipment in those locations, due to conducted
electromagnética con el equipo de clase A en dichas ubicaciones,
as well as radiated disturbances.
as well as radiated disturbances.
debido a las perturbaciones tanto conducidas como radioeléctricas.
Do not dispose of electrical equipment together with normal waste!
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
WARNING
WARNING
PROTECT YOURSELF AND OTHERS!
PROTECT YOURSELF AND OTHERS!
ADVERTENCIA
5
PRECAUCIONES DE SEGURIDAD
Publicidad
Tabla de contenido
