Control panel
A LCD-display
The LCD-display shows the selected programme as well as the remaining programme
time. An active programme is indicated by the continuously flashing colon in the time
display.
Example:
In this case, programme 2 (for WHITE BREAD/FRENCH BREAD) has been selected
via the
button. The display shows: 2 3:35; in addition, the weight is shown in the
form of a dot in the upper part of the display, indicating a weight of 1kg; the selected
browning level is shown as 'medium', indicated in the form of a dot symbol in the lower
part of the display. The total programme running time is 3 hours and 35 minutes.
B Timer
Programmes 1, 2, 3, 4, 8, 9 or 10 may be started with a delayed timer setting, enabling the
selected programme to finish up to 12:58 hours later.
Example:
You want to start the programme at 20h00, and you would like your bread to be finished
at 7h30 the next morning. Accordingly, the total programme running time will be 11
hours and 30 minutes.
- Use the
button to select the desired programme.
- Press the appropriate
- Add the ingredients following the instructions given in the section Operation. Avoid
any contact between the yeast and fluids or salt.
Do not use the timer function where a recipe requires the use of perishable ingredients
●
such as eggs, fresh milk or fruit. The timer function is also unsuitable for recipes which
require the addition of any ingredients (e.g. nuts, grains or dried fruits) during the
second kneading phase.
C Browning
Baking programmes 1-3 allow for a pre-selection of the desired level of browning: four
settings are available; the fourth setting, however, serves for additional quick-browning.
The selected level of browning is shown in the form of a dot in the lower part of the
LCD-display.
LIGHT
MEDIUM
DARK
QUICK
D Menu
Press the
button until the desired programme is shown in the LCD-display (A).
The menu allows for 12 different programmes to be selected:
button until the display shows a total running time of 11:30.
19