Water Shortage; Error History - Testomat EVO TH Serie Manual De Instrucciones

WATERLOW COUNT
Count
SD Card n. inserted
12.09.13 09:00
12.09.13 09:00
12.09.13 09:05

Water shortage

The water shortage error is a special case, since one further setting
can be configured for this error. In the menu, under
Basic program
=>
the number of consecutively occurring errors before the alarm is trig-
gered can be set. An error is then generated for each measurement
cycle.
Number of water shortage errors
0
This function is specially provided for systems subject to intermittent
low water pressure errors, which trigger a "
device. The number 0 can be set for an immediate message, or the
setting can be raised to 250 occurrences before the error alert is
sent.

Error history

 Service
Select =>
to call up error history.

Show(OK)
Select "

Confirm the input with "OK"

Select an error message from the list using the arrow keys.
The time and date of the occurrence are shown.

Again, press "OK".
Now –
depending on the error type
are shown.
If the error remains current, no end time is registered.

To delete the entire list, select
Delete(OK)
The number indicates the number of stored notifications.
The error history has room for up to 20 notifications.
Input basic programming data
Waterlow count
=>
Water low
Error History
=>
", to show the list of error messages.
– the start and end of the error
20
" error in the
45