Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Input basic programming data
CHANGE PASSWORD
Old:
New:
PASSWORD PROTECTION
Active:
PW:
FIRMWARE UPDATE
Execute (OK)
Observe ESD safety
precautions! See the
information on page 8
NOTE
54
Change password
In the menu
Basic program
=>
0000
the password can be set. For this purpose, the existing four-digit
0000
password code must be input, before the new code, which includes
four digits, can be input.
The default password on delivery is 0000.
Password protection
In the menu
Basic program
=>
-
the set password can be activated. For this purpose, the existing
0000
four-digit password code must be input first.
Firmware update
Menu-driven firmware update
In the menu
=> Basic program => Firmware update
the operating software of the Testomat device is updated. For this
purpose, you need an SD card.
Implement the firmware update as follows:
Download the firmware update for the Testomat
Heyl website and save it in the root directory of the SD card to be
inserted into the Testomat
Insert the SD card into the Testomat
Select in the menu
=> Basic program => Firmware update
Confirm the selection with "OK"
Select the filename of the update. If only one file exists, only con-
firmation is required.
Confirm the selection with "OK"
The Testomat restarts and implements the update. In this mode, alt-
hough no text is output, the status is indicated via the LEDs of the SD
card as well as those on the control card.
During the firmware update, the red LED lights up next to the SD
card plug-in slot (which indicates that the so-called bootloader
is active).
Change Password
=>
Password protection
=>
®
EVO TH
®
EVO TH
®
EVO TH from the
Publicidad
Tabla de contenido
