Descargar Imprimir esta página

Kawai ES7 Instrucciones De Montaje página 3

Ocultar thumbs Ver también para ES7:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

3. Attaching the F-301 pedal unit to the HM-4 stand
Remove the hole patches from the back board of the HM-4 stand.
Fasten the F-301 pedal unit to the HM-4 stand using four short
screws f at the top and bottom of the back board.
* Ensure that all four screws are tightened firmly.
patch
4. Attaching the ES7/ES8 digital piano to the
HM-4 stand
Fasten the underside of the ES7/ES8 digital piano to the HM-4
stand using the four knobs included with the HM-4 stand.
* Ensure that all four knobs are tightened firmly.
6. Adjusting the pedal support bolt
Turn the Adjuster Bolt at the bottom of the Pedal Box a until
the bolt fully supports the Pedal Box a.
HM-4
5. Attaching and connecting the F-301 pedal
unit to the ES7/ES8 digital piano
Fasten the F-301 pedal unit to the underside of the ES7/ES8
digital piano using the two knobs e.
* Ensure that the two knobs are tightened firmly.
Plug the pedal cable connector into the PEDAL jack, then fix the
cable to the pedal pillar using the Cable Clips h.
e
short
screw
h
3

Publicidad

loading

Este manual también es adecuado para:

Es8F-301