Craftsman 107.280340 Manual Del Operador página 5

important Safety instructions
SAVE THESE iNSTRUCTiONS - This manual contains
important instructions that should be followed during the
initial set-up, the operation, and the maintenance of the
equipment.
--'] WARNING The exhaust from this
engine product
contains chemicals known to the State of California to
cause cancer, birth defects, or other reproductive harm.
Safety Symbols and Meanings
FiRE MOVING PARTS SHOCK STOP
TOXIC FUMES EXPLOSION ONOFF KICKBACK
HAZARDOUS
CHEMICAL
WEAR EYE NOT SURFACE CHOKE
PROTECTION
_ WARNING Certain in this
components product
and its related accessories contain chemicals known to
the State of California to cause cancer, birth defects, or
other reproductive harm. Wash hands after handling.
I_-----IWARNING Battery posts, terminals, and related
accessories contain lead and lead compounds -
chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm. Wash
hands after handling.
m
BEADMANUAL
FAST SLOW OiL
FUEL
_The safety alert symbol is used to identify safety
information about information about hazards that can
result in personal injury. A signal word (DANGER,
WARNING, or CAUTION) is used with the alert symbol to
indicate the likelihood and the potential severity of injury.
In addition, a hazard symbol may be used to represent
the type of hazard.
DANGER indicates a hazard which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazard which, if not
avoided, could result in death or serious injury.
r_ CAUTION indicates a hazard which, if not avoided,
could result in minor or moderate injury.
WARNING Running engine gives off carbon
1_ onoxide, an odorless, colorless, poison gas.
Breathing carbon monoxide can cause headache,
fatigue, dizziness, vomiting, confusion, seizures,
nausea, fainting or death.
• Operate equipment ONLY outdoors.
• Keep exhaust gas from entering a confined area
through windows, doors, ventilation intakes, or other
openings.
[_ NOTICE indicates a situation that could result in
damage to the product.
5