Mounting & Rigging - NEO STORMER QUAD Manual De Usuario

DIP-switches. Secondarily, the fixtures that follow
may also require a slave setting.
Check the "Operating Adjustments" section in this
manual for complete instructions for this type of
setup and configuration.
Mounting & Rigging
This fixture can be mounted in any orientation
(vertical, horizontal). Always make sure there is
Do not mount the fixture in the ventilation path of a nearby heating supply duct.
The heated airflow will cause fixture failure due to overheating.
adequate ventilation and no flammable surfaces
within 2 feet (.6 meters) of the fixture. You can
mount the fixture using fixture clamps or with
threaded bolt type hardware. Always install the
included safety eyebolt and cable when mounting
in overhead or wall locations.
P. 9
English version - Neo Stormer Quad