Standard Accessories - HIKOKI RP 3608DB Instrucciones De Manejo

English
Changes over when the switch is pressed
Automatically changes over when pairing is
complete
Remaining battery indicator switch
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
The battery remaining power is less than 25%.
Recharge the battery soonest possible.
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or
malfunction. The problem may be the battery
so please contact your dealer.
NOTE
To prevent the battery power consumption caused by
forgetting to turn off the LED light, the light goes off
automatically in about 2 minutes.

STANDARD ACCESSORIES

(1) Hose (Inner Diameter Φ28 x Length 5m)
(For connection with electric tool) .................................1
(2) Plastic bag (5 pcs.) .......................................................1
(3) Joint (A) ........................................................................1
(4) Joint (D) ........................................................................1
(5) Tool Box* ......................................................................1
(6) Battery (BSL36A18)* ....................................................2
(7) Charger (UC18YSL3)* ..................................................1
(8) Battery cover* ...............................................................2
Standard accessories are subject to change without
notice.
* (NN) specifi cations is excluded.
SELECTING ACCESSORIES
The accessories of this machine are listed on page 138.
Optional accessories are subject to change without notice.
APPLICATIONS
○ General cleaning in workplaces and others.
○ Collection of fi ne dusts generated during grinding,
cutting or drilling of concrete or wood using power tools.
SPECIFICATIONS
1. Power tool
Model
Item
Rated voltage
Motor
Application
Max. Airfl ow
Max. Vacuum
Details-Dry
Filter Class
Bluetooth
Battery available for this
tool*
Dimensions (W × D × H)
Weight**
* Existing batteries (BSL3660/3626X/3626/3625/3620,
BSL18xx and BSL14xx series) cannot be used with
this tool.
** According to EPTA-Procedure 01/2014
2. Battery
Model
Voltage
Battery capacity
Available cordless
products**
Available charger
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the
receptacle.
When connecting the plug of the charger to a
receptacle, the charge indicator lamp will blink in red
(At 1- second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 2 (on page 2).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 1)
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be
as shown in Table 1, according to the condition of the
charger or the rechargeable battery.
12
RP3608DB
36 V
DC motor
Dry type
3.5 m /min
3
20.1 kPa
8 L
L
Bluetooth Ver. 5.0
Bluetooth frequency range:
2.402-2.480GHz
Multi volt battery
331 mm × 369 mm × 382 mm
10.5 kg (BSL36A18 x 2pcs.)
11.0 kg (BSL36B18 x 2pcs.)
BSL36A18
36 V / 18 V (Automatic Switching*)
2,450 mAh / 4,900 mAh
(Automatic Switching*)
Multi volt series, 18 V product
Sliding charger for lithium ion
batteries