Reliable MAVEN 120IS Manual De Instrucciones página 16

PROGRAMMED TEMPERATURE
Press the function button to turn on the appliance and
select your desired temperature. Beeping sounds will be
heard when the function button is pressed.
Depending on the temperature setting you selected, the
corresponding temperature symbol on the control panel
will be flashing. When the iron is ready for use, the tem-
perature symbol will stop flashing and remain on..
Important note: The first time you use the iron, the
pump will take a few seconds to generate steam. During
this time, you may hear a "pumping" sound. This is
normal and will occur before the iron is ready to use.
Steam ironing is available for all temperature settings
except 'Dot 1'. You can press and hold the steam trigger
to generate steam for steam ironing. A beep will be heard
when the steam trigger is pressed and the respective
steam indicator for 'Auto Mode', 'Dot 2', 'Dot 3' and 'Max'
will flash, indicating it is generating steam. Release the
steam trigger to stop generating steam.
Adjust the temperature setting of the appliance by
pressing the function button.
After use, press and hold the function button for 2 sec-
onds to turn off the appliance.
It is recommended to drain the water inside the water
tank after every use. See '"Draining the water tank"
instructions.
14