Installing The Speaker System On A Tripod - Sony GTK-PG10 Manual De Instrucciones

Installing the speaker
system on a tripod
Match the hole on the speaker system
() to the tripod (not supplied) (),
then gently push it downward until it
is inserted completely to the tripod.
Be sure to use the tripod of
approximately 35 mm (1 3/8 in) in
diameter and that weighs 2.8 kg (6 lb
2 oz) or more and can withstand the
weight of 10 kg (22 lb) or more.
Depending on the tripod
specifications, the speaker system
installed on the tripod may not face in
an adequate direction.
Less than
1.2 m
(47 1/4 in)
More than 0.55 m (21 21/32 in)*
* We recommend you to expand the tripod
legs to maximum.
Note
Take the following precautions when
installing the speaker system on the tripod
to avoid personal injury or damaging the
speaker system.
• Set up the tripod completely before you
install the speaker system. Be sure to read
the operating instructions of your tripod.
• Do not install the speaker system on
the tripod placed on unstable surface,
walkway or any other unsuitable locations.
• Make sure the speaker system is attached
on the tripod securely.
• Do not push the speaker system or place
any objects on the speaker system when it
is installed on the tripod.
35 mm (1 3/8 in)
• Do not rotate or lift the speaker system
when it is installed on the tripod.
• Do not walk over the tripod legs to avoid
from tripping.
• Disconnect the AC power cord (mains
lead) and all cables, and detach the
speaker system from the tripod when you
want to move the tripod, speaker system
or the subwoofer.
• Be careful not to trip over the speaker
cable, tripod legs or the AC power cord
(mains lead).
• Keep children away from the speaker
system installed on the tripod.
• Take other precautions to prevent the
speaker system installed on the tripod
from falling.
11
GB