Bluetooth Connection; Pairing This System With A Bluetooth Device - Sony GTK-PG10 Manual De Instrucciones

BLUETOOTH connection

Pairing this system with
a BLUETOOTH device
Pairing is an operation in which
BLUETOOTH devices register each
other beforehand. Once the pairing
operation has been performed, it does
not need to be performed again for
those devices.
1
Place the BLUETOOTH device
within 1 m (3 ft) from the
system.
2
Select the BLUETOOTH
function.
 Press the  button to turn on
the system.
 Press the FUNCTION
button repeatedly until the
(BLUETOOTH) indicator on
the unit flashes slowly.
Hint
When there is no pairing information
on the system (for example, when
you use the BLUETOOTH function
for the first time after purchase), the
(BLUETOOTH) indicator flashes quickly
and the system enters the pairing mode
automatically. In this case, proceed to
step 4.
3
Hold down the FUNCTION
PAIRING button for more than
3 seconds.
Voice guidance ("Bluetooth
pairing") will be output and the
quickly.
4
Turn on the BLUETOOTH
function on the BLUETOOTH
PAIRING
device.
For details, refer to the operating
instructions of your BLUETOOTH
device.
5
Select "GTK-PG10" on the
display of the BLUETOOTH
device.
If passkey is required on the BLUETOOTH
device, enter "0000." "Passkey" may
be called "Passcode," "PIN code," "PIN
number," or "Password."
(BLUETOOTH) indicator will flash
Bluetooth
pairing
BLUETOOTH
GTK-PG10
Note
15
GB