Storing the appliance
Descaling the water tank
Follow the instructions below to remove limescale from the tank:
1. Remove the water tank from the appliance.
2. Fill the tank with water and add one to two tablespoons of vinegar.
3. Close the water tank and shake well.
4. Leave the solution in the tank for a few hours in the tank in order to
loosen the limescale.
5. Then empty the water tank and rinse it out thoroughly with water.
Storing the appliance
1. Switch off the steam cleaner. Unplug the appliance after use.
2. Allow the appliance to cool down.
3. Empty the water tank and rinse it out once with clean water.
4. Remove the cleaning cloths. Wash them if necessary or leave them
to dry.
5. Leave the steam cleaner to dry.
6. Wind the mains cable on the cable holders.
7. Store the appliance in a dry location.
The handle can be folded down again for transport or storage (see
Fig. F).
− To do this, press the two catches
− Carry the appliance using the handle provided
20
and fold down the handle.
12
.
4