Saeco S-CLASS INCANTO de luxe Instrucciones De Uso página 37

This function enables the user to see how many coffees the
machine has already dispensed.
This is a factory-set function that automatically switches the
machine into "Standby" when 3 hours have elapsed since a
coffee was dispensed.
The switch-off time can be adjusted, in 15-minute intervals,
to a minimum of 15 minutes; the function cannot be
deactivated.
This function is used to rinse all the coffee-dispensing parts
with water.
Fill the tank with fresh drinking water.
The rinsing cycle cannot be interrupted.
A person must be present during this operation.
Warning: a large quantity of water may be discharged from the
coffee brew unit. Before starting, empty out the drip tray and
keep an additional container handy.
PROGRAMMING MACHINE FUNCTIONS
TOTAL COFFEES *
TIMER
When the function ap- The display will show the
pears, select it using the number of coffees the
"OK" button. machine has dispensed.
TIMER *
CLOCK
When the function ap- Use the buttons to adjust
pears, select it using the the timer setting.
"OK" button.
RINSING CYCLE *
FACTORY SETTINGS
When the function ap- The machine will carry out
pears, select it using the a rinsing cycle.
"OK" button.
TOTAL COFFEES TOTAL COFFEES
2
Press "ESC" to exit the
menu.
STANDBY STANDBY
AFTER 3:00 AFTER
Press the "OK" button to
confi rm your choice.
RINSING CYCLE
FILL WATERTANK
When
completed this message
will be displayed:
37
2
1:15
the cycle is