Using Your Nursing Bed; Assembling/Disassembling, Transport And Storage; Installation - Vermeiren Illico Manual De Instrucciones

3

Using your nursing bed

3.1

Assembling/disassembling, transport and storage

The bed will be assembled by your specialist dealer according to the instructions on our
website.
For transport, all parts are collected on a transport trolley. Attach the transport trolley and bed
parts firmly to the vehicle, so they won't move during transport.
If not in use, store the bed at a dry location, see chapter 6 for the details.
3.2

Installation

CAUTION
Make sure that the bed is moved without any person in it.
•
If not yet assembled, assemble the bed according to the instructions on the website.
•
If the bed is in use, make sure that all covers and sheets are within the side rails.
•
Unplug the power cable from the socket and place the cable end on the bed.
•
Release all brakes of the castor wheels, see [A] in next figure.
•
Roll the empty bed in place.
•
When in position, apply the four brakes, see [B] in next
figure.
•
Connect the power cable of the bed to the 220/230V
AC power socket
Releasing brakes [A]:
Use your foot to press the top of the
brake lever backwards.
Applying brakes [B]:
Use your foot to press the brake lever
down towards the castor wheel.
Risk of injuries and damage
Castor wheel with brake
EN - 7
2018-07
Using your nursing bed
A
B
EN
Illico
NL