Vermeiren DX2 Basic Manual De Instrucciones página 17

Select left/right with the joystick or the menu
selection button (10) until the brightness function
you want appears in the centre of the display.
If you want to change the brightness function,
confirm by moving the joystick upwards.
Adjust the display's brightness function by moving
the joystick left/right or selecting the left/right
menu selection button (10).
= inwards
= outwards
= automatically (via light sensor (7))
To save the brightness function you have
selected, confirm by moving the joystick upwards.
To switch back to the driving program, select the
drive profile button (8) in drive mode.
If you have special requirements, you can ask
Vermeiren to enter an individual driving program (changes in the software).
15
DX2 Operator control
vD - 2013-04