Makita DUC252 Manual De Instrucciones página 11

Ocultar thumbs Ver también para DUC252:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 70
ENGLISH
(Original instructions)
1
Red indicator
2
Button
3
Battery cartridge
4
Star marking
5
Battery indicator
6
Indicator lamps
7
Check button
8
Lock-off button
9
Switch trigger
10 Front hand guard
11 Lock
12 Unlock
13 Adjusting screw
14 Sprocket cover
15 Lever
SPECIFICATIONS
Model
Standard guide bar
Standard saw chain
Sprocket
Overall length (without guide bar)
Net weight
Chain speed per minute
Chain oil tank volume
Rated voltage
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
*1 Weight, with largest battery cartridge, without guide
bar and chain, empty oil tank, according to EN ISO
11681-2.
*2 Weight, with battery cartridge, guide bar, and chain,
filled oil tank, according to EPTA-Procedure 01/2003.
WARNING: Use appropriate combination of the guide
bar and saw chain. Otherwise personal injury may result.
Explanation of general view
16 Adjusting dial
17 Sprocket
18 Adjusting pin
19 Hole
20 Guide bar
21 Loosen
22 Tighten
23 Saw chain
24 Oil tank cap
25 Oil inspection window
(for refilling the tank with oil)
26 Oil inspection window
27 Spike bumper
28 Felling area
29 Felling direction
Guide bar length
Cutting length
Sprocket nose
Type
Type
Pitch
9.5 mm (3/8")
Gauge
1.3 mm (0.05")
No. of drive links
Number of teeth
Pitch
9.5 mm (3/8")
*1
*2
DUC252
250 mm
23 cm
24 cm
Carving bar
bar
91PX
25AP
6.35 mm (1/4")
1.3 mm (0.05")
40
60
6
9
6.35 mm (1/4")
4.6 kg
8.3 m/s (500 m/min)
D.C. 36 V
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
30 Danger zone
31 Escape route
32 Guide bar cover
33 Battery cover
34 Cutting length
35 Distance between cutting edge
and depth gauge
36 Minimum 3 mm
37 Side plate angle
38 Slotted screwdriver
39 Locking ring
40 Limit mark
41 Brush holder cap
42 Screwdriver
DUC302
300 mm
28 cm
Sprocket nose bar
90PX
9.5 mm (3/8")
1.1 mm (0.043")
46
6
9.5 mm (3/8")
316 mm
4.1 kg
4.7 kg
3
85 cm
D.C. 36 V
• Read instruction manual.
• Wear eye protection.
• Wear ear protection.
• Wear a helmet, goggles and ear
protection.
END313-2
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Duc302Duc252z

Tabla de contenido