SEVERIN MW 7816 Instrucciones De Uso página 23

around the lower part of the door. Take special care, therefore, when opening the unit
after use.
- The water collection channel should be emptied in good time to prevent it from over-
flowing.
Fitting the water collection channel
Before the steam-cooking function can be used, the water container and water collection
channel must be fitted to the unit.
- If the collection channel (3) is full of water, it must be emptied right away. You can
either use a dry cloth to soak up the water, or remove the channel and pour the water
away. To remove the channel, the door (1) must be fully open. Press both buttons at
once and remove the channel carefully.
- To replace the channel, open the door all the way, place the three locating lugs (b) on the
channel into the three corresponding rectangular holes (a) in the bottom of the unit.
Push the channel firmly in to ensure it locks into place.
23