Suction Intake And Side Brushes - ECOVACS ROBOTICS DEEBOT N78D Manual De Instrucciones

Cleaning the Water Reservoir
If the mopping system was used, remove the
Water Reservoir from the bottom of DEEBOT.
Empty any remaining water from the Reservoir,
and set out to dry.

4.3 Suction Intake and Side Brushes

* A Multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this
cleaning tool has sharp edges.
Cleaning Suction Intake
Wipe the Suction Intake with a dry cloth.
4. Maintenance
Wipe the outside of the Water Reservoir with a
dry cloth.
Cleaning the Side Brushes
Remove any hair or debris tangled around the
Side Brushes with the provided Multi-Function
Cleaning Tool. Remove the Side Brushes and
wipe the Side Brushes and their slots with a
clean cloth.
21
EN