ECOVACS ROBOTICS DEEBOT N78D Manual De Instrucciones página 14

3. Operating and Programming
4 Charge DEEBOT
Place DEEBOT on the Charging Dock
making sure the Charging Contacts on
DEEBOT and the Charging Dock Pins make
a connection.
Charge DEEBOT for at least 4 hours before
first use.
Make sure to turn the robot's Bottom Power Switch to the ON position before charging.
*
("I"=power ON; "O"=power OFF. The robot's default setting is "O".) DEEBOT is powered ON
when the AUTO Mode Button glows a continuous BLUE.
AUTO Mode Button blinks when DEEBOT is charging. AUTO Mode Button stops glowing
*
when DEEBOT is fully charged.
Remove the Water Reservoir before charging DEEBOT.
*
5 Start
Press the AUTO Mode Button on DEEBOT or on the Remote Control. DEEBOT starts to work
immediately in AUTO Cleaning Mode.
* To choose another Cleaning Mode, please refer to section 3.3 Cleaning Mode Selection for details.
12
EN