Step By Step Instructions; Installing Your Washer; Step 1 - Unpack The Washer - Haier GWT480BW Manual Del Usuario

sTEP BY sTEP InsTRUCTIons

InsTaLLInG YoUR WasHER

We recommend that your new washer be installed by a qualified appliance
technician. If you feel that you have the skills to install the washer, please read the
installation instructions carefully before installing.
CaUTIon: If, after completing these steps, you are unsure that the washer is
properly installed, contact a qualified appliance technician.
If your washer was just delivered and the outside temperature was
below freezing, do not operate until the washer warms up to room
temperature.

sTEP 1 - UnPaCK THE WasHER

1. Remove all packing materials. This includes the foam base and all adhesive tape
holding the washer accessories inside and outside.
2. Open the top lid to remove the wash basket brace. Pull to remove.
noTE: Save the wash basket brace to use when moving the washer in the future.
3. Inspect and remove any remains of packing, tape or printed materials before
using the washer.
To avoid danger of suffocation, keep plastic bag and other packing
material away from babies and children. Do not use this bag in cribs,
carriages and playpens. The plastic bag could block nose and mouth
and prevent breathing. This bag is not a toy.
8
WARNING
WARNING