Step 3 - Load The Washer; Step 4 - Start The Washer - Haier GWT480BW Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ADD blEAcH (if DESirED)
Pour measured liquid chlorine bleach into the
liquid chlorine bleach dispenser.
noTE: Use only liquid bleach in this dispenser.
IMPoRTanT: Be careful not to spill undiluted
bleach onto the washer cabinet or your
clothes. Since it is a strong chemical, it may
damage clothes or the finish of the washer.
The liquid bleach in the dispenser is dispensed
immediately after a wash cycle starts.
Follow manufacturer's directions on garment
label for recommended use of liquid or powder
bleach.

sTEP 3 - LoaD THE WasHER

1. Open the washer lid and load clothes evenly and loosely to the wash basket for a
balanced load.
2. Close the washer lid.
noTEs:
Do not overload or stuff items into the wash basket.
The washer will not pulsate or spin with the lid open.

sTEP 4 - sTaRT THE WasHER

1. Turn the washer on by rotating the CYCLE SELECTION KNOB.
2. Select a wash cycle.
3. Modify the default settings and options if desired.
4. Press the START/PAUSE BUTTON on the face of the knob to start the wash
cycle.
16

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido