Philips Fidelio E6/12 Manual Del Usuario página 21

Bluetooth on the main unit
1
Press on the remote control to switch
the main unit to Bluetooth mode.
» BT on the display blinks.
2
On the Bluetooth device, switch on
Bluetooth, search for and select Philips
E6 to start connection (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
» During connection, BT on the display
panel blinks.
3
Wait until BT on the display lights up.
» If the connection succeeds, BT on the
display panel lights up.
» If the connection fails, BT on the
display panel blinks.
4
Select and play audio files or music on
your Bluetooth device.
• During play, if a call is coming,
music play is paused (this feature is
dependent on the connected mobile
phone).
• If your Bluetooth device supports
AVRCP profile, on the remote control
you can press
or press
• If music streaming is interrupted, place
the Bluetooth device closer to the
main unit.
5
To exit Bluetooth, select other source.
» When you switch back to Bluetooth
mode, Bluetooth connection resumes.
• To break the current Bluetooth
connection, press and hold
remote control.
Bluetooth on a single surround
speaker
You can use the left or right surround
speaker as a standalone Bluetooth speaker,
independently from the main unit.
EN
20
/ to skip to a track,
to pause/resume play.
on the
1
Press the button on the left or right
surround speaker to switch to Bluetooth
mode.
» The LED on the left or right
surround speaker blinks.
2
On the Bluetooth device, switch on
Bluetooth, search for and select the name
of the left or right surround speaker to
start connection (see the user manual of
the Bluetooth device on how to enable
Bluetooth).
• Philips E6 -L stands for the left
surround speaker, Philips E6 -R for the
right surround speaker.
» During connection, the
left or right surround speaker blinks.
3
Wait until the
speaker lights up.
» If the connection succeeds, connection
tone is heard, and the
surround speaker lights up.
» If the connection fails, the
the surround speaker blinks.
4
Select and play audio files or music on
your Bluetooth device.
• During play, if a call is coming,
music play is paused (this feature is
dependent on the connected mobile
phone).
• If music streaming is interrupted, place
the Bluetooth device closer to the
surround speaker.
5
To exit Bluetooth, press the SOD button
on the surround speaker.
» Then the surround speaker is wirelessly
re-connected to the main unit.
LED on the
LED on the surround
LED on the
LED on