Product Specifications - Philips Fidelio E6/12 Manual Del Usuario

8 Product
specifications
Note
•
Specifications and design are subject to change without
notice.
Amplifier
• Total output power:
192W RMS (+/- 0.5 dB, 10% THD)
• Frequency response: 20 Hz-20 kHz / ±3 dB
• Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
• Input sensitivity:
• AUDIO IN: 500 mV
• AUX: 1000 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class (MSC)
• File system: FAT16, FAT32, NTFS
• Playable audio files: .aac, .mka, .mp3, .wav,
.m4a, .flac, .ogg, .ape, .dsf, .dff
WLAN
•
Frequency band/Output power:
• 2412 - 2472 MHz (Europe) /
≤ 20 dBm
• 2412 - 2462 MHz (US and Asia)/
≤ 20 dBm
• 5180 - 5240 MHz (worldwide)/
≤ 14 dBm
• 5745 - 5825 MHz (US and Asia)/
≤ 14 dBm
•
In Europe, 5150MHz - 5350MHz is
restricted to indoor use only.
• Support wireless standards:
IEEE802.11 a/b/g/n
•
Supported channels:
2.4 GHz: 1 to 13 (Europe) or 1 to 11
•
(US and Asia)
• 5.X GHz: 36, 40, 44, 48 (worldwide)
and 149, 153, 157, 161, 165 (US and
Asia)
Bluetooth
•
Bluetooth profiles: A2DP, AVRCP,
• Bluetooth version: Bluetooth V4.1 with
Bluetooth Low Energy
•
Frequency band/Output power:
2400 - 2483.5 MHz / ≤ 20 dBm
•
NFC frequency: 13.56 MHz
Wireless speaker link
•
Frequency band: 5725 - 5875 MHz
•
Output power: ≤ 14 dBm
Main unit (left and right base speakers)
• Power supply: 110-240 V~, 50-60 Hz
•
Power consumption: 70 W
•
Standby power consumption:
• ECO standby: ≤ 0.5 W
• Networked standby: < 6 W
• Dimensions (W x H x D):
161 x 302 x 161 mm
•
Weight: 2.4 kg/each
• Built-in speakers
• Left/Right channel:
2 x woofer (76.2 mm/3", 8 ohm) +
2 x tweeter (25.4 mm/1", 8 ohm)
• Center channel: 2 x full-range
(76.2 mm/3", 8 ohm)
Surround speakers
• Speaker impedance: 8 ohm
EN
25