Enjoying Multiplex Broadcast Sound (Audio); Saving Power Consumption; Saving Power In Standby Mode - Sony HT-MT300 Manual De Instrucciones

Enjoying Multiplex
Broadcast Sound (AUDIO)
You can enjoy multiplex broadcast
sound when the system receives a
Dolby Digital multiplex broadcast signal.
Press AUDIO repeatedly.
The channel changes cyclically as
follows.
 
Main Sub Main/Sub
Main
Outputs only the main channel.
The MOVIE and MUSIC indicators flash twice.
Sub
Outputs only the sub channel.
The MOVIE indicator flashes twice.
Main/Sub
Main sound is output from the left speaker
and sub sound is output from the right
speaker.
The MUSIC indicator flashes twice.
Note
To receive a Dolby Digital signal, you need
to connect a TV or other devices to the TV
IN (OPTICAL) jack with the optical digital
cable (supplied).
Saving Power
Consumption
To use the system while saving power
consumption, change the following
settings.
Turn the System Off by
Detecting the Using State
When you set the auto standby function
AUDIO
to on, the system enters standby mode
automatically when you do not operate
the system for about 20 minutes and
the system is not receiving an input
signal.
Hold down MOVIE/MUSIC for 5
seconds to set the function to on or
off.
Auto standby on
The USB and ANALOG indicators flash twice.
Auto standby off
The USB indicator flashes twice.
Saving Power in Standby
Mode
To save power consumption during the
standby mode, set the BLUETOOTH
standby mode to off (page 23).
The default setting is on.
MOVIE/MUSIC
25
US