Functional Description - Makita DLM380 Manual De Instrucciones

Ocultar thumbs Ver también para DLM380:

Manual de instrucciones (37 páginas)

Contenido

Tabla de contenido

Idiomas disponibles

37. Do not put hands or feet near or under rotating

parts. Keep clear of the discharge opening at all

times.

38. Do not transport the machine while the mower is

turned on.

39. Stop the machine, and remove the disabling

device. Make sure that all moving parts have

come to a complete stop

–

whenever you leave the machine,

–

before clearing blockages or unclogging

chute,

–

before checking, cleaning or working on the

machine,

–

after striking a foreign object. Inspect the

machine for damage and make repairs before

restarting and operating the machine;

40. If the machine starts to vibrate abnormally

(check immediately)

–

inspect for damage,

–

replace or repair any damaged parts,

–

check for and tighten any loose parts.

41. Be careful during adjustment of the machine to

prevent entrapment of the fingers between

moving blades and fixed parts of the machine.

42. Mow across the face of slopes, never up and

down. Exercise extreme caution when changing

direction on slopes. Do not mow excessively

steep slopes.

43. Do not wash with a hose; avoid getting water in

motor and electrical connections.

44. Check the blade mounting bolt at frequent

intervals for proper tightness.

45. Keep all nuts, bolts, and screws tight to be sure

the equipment is in safe working condition.

46. Always allow the machine to cool down before

storing.

47. When servicing the blades be aware that, even

though the power source is switched off, the

blades can still be moved.

48. Replace worn or damaged parts for safety. Use

only

genuine

accessories.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE

Before

using

battery

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product

using battery.

Do not disassemble battery cartridge.

If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

replacement

parts

ENC007-9

cartridge,

read

If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating,

breakdown.

Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

Be careful not to drop or strike battery.

Do not use a damaged battery.

10. Follow your local regulations relating to disposal

of battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the

battery cartridge when you notice less tool

power.

Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

Charge

the

temperature at 10°C – 40°C (50°F – 104°F).

Let a hot battery cartridge cool down before

charging it.

Charge the battery cartridge if you do not use it

for a long period (more than six months).

and