Sony HWS-BTA2W Manual De Instrucciones página 13

4
If Passcode* input is required on the display of the BLUETOOTH
stereo audio source device, input "0000."
* Passcode may be called "Passkey," "PIN code," "PIN number," or "Password."
5
Start the BLUETOOTH connection from the BLUETOOTH device.
Some BLUETOOTH stereo audio source devices may connect with the unit
automatically when pairing is complete.
When the BLUETOOTH connection is made properly, both the 1 indicator (green) and
indicator (blue) light up indicating that pairing is complete, and pairing information
is memorized on this unit.
Note
If you turn off this unit or the BLUETOOTH stereo audio source device, pairing information is not
memorized and pairing is not complete.
When pairing with a BLUETOOTH stereo audio source device that cannot display a list of
detected devices or that has no display
You may pair the device by setting both this unit and the BLUETOOTH stereo audio source device to
pairing mode. For details, refer to the operating instructions supplied with the device.
If pairing is not complete
Start over from step 1.
Tip
To pair with other BLUETOOTH devices, repeat steps 1 to 5 for each device.
Note
Passcode of this unit is fixed to "0000." This unit cannot be paired with a BLUETOOTH stereo audio
source device whose Passcode is not "0000."
13
US