Nameplate Layout - Siemens SITRANS P DS III 7MF4.33 Serie Manual De Instrucciones

WARNING
Using a damaged or incomplete device
Danger of explosion in hazardous areas.
● Do not use damaged or incomplete devices.
1.5

Nameplate layout

Nameplate with general information
The nameplate bearing the Order No. and other important information, such as design details and technical data, is on the
side of the enclosure.
D-761 81 K arlsr uhe
SITRANS P
PED:SEP
Tr ansmit ter fo r pressur e
7MF4033-1EB1 0-1D A1
Fab. Nr. N1LN1 1-0 047 11
V :DC1 0.5-45 V (not intr.s ave ) outp.:4-20 mA
H
Mat.: Connec. Diaphr.
1.4404 2.481 9
Measuring span
Ove rrange limits
Type of protection IP 65
Made in Fr ance
①
Order number (machine-readable product code)
Figure 1-1 Example of a nameplate
Nameplate with approval information
On the opposite side is the nameplate with approval information. This nameplate shows e.g. the hardware and firmware
versions. Certificate information is also listed if the transmitter is an ex-version.
SITRANS P, DS III series (7MF4.33.. 7MF4.34.. 7MF4.35..)
A5E03434626-02, 12/2012
0 032
F illing
Silik onöl
: 0.6 3 - 6 3 bar
: -1 - 100 bar
②
Serial number
5