Product Introduction; Description Of The Device - TECshow BOMBER Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Product Introduction:

1.1 Before unpack the fixture, pls make
sure that the packing is in good condition,
following items will be found in the box:
The fixture
This users guide
3m DMX cable
1.5m power cable with powercon
Omega bracket for hanging installation
Safety chain
1.2 Specification
Source
Light source: 1pcs OSRAM 60W 4in1 leds
Led life: 60.000 hours
Luminous Flux: 2300lumen, 15850lux@2.5m
Control: Remote on/off via DMX
Ballast: switching mode power supply
Optical System
Beam angle: 6°
X/Y
Pan: 360° (2.0 sec) or 540°(1.5 sec), Tilt: 265° (1.1 sec)
16-bit resolution
Auto repositioning
3 phase motor for crazily fast and quiet movement
Features
DMX channels: 16/14
Super fast, smooth and silent movement
RGBW four colors mixing to create vivid, saturated and
uniform color effect
Two virtual color wheel for color bounce effect
Color temperature preset at 2700K, 3200K, 4200K, 5600K
and 8000K
Full range 0-100% dimmer
Various strobe
RDM function to change DMX address, display flip, X/Y
Reverse and so on
Software upgrade via DMX
Hibernation when lost DMX for preset time
Indicate temperature info of base, arm and lamp
Fan speed auto change according to temperature
Heat pipe for cooling
Display
BOMBER
ENGLISH VERSION
1.2inch super nice OLED display with friendly English/
Chinese/French/Spanish menu
Auto lock
Flip
Back-up communicating IC

1.3 Description of the Device

1. Project lens
2. Head
3. Arm
4. Base
8. Mic
9. Mode/ESC button
10. Down button
11. Up button
12. Enter button
13. Fuse holder
5. Display
6. Foot stand
7. Operation button
14. Power switc h
15. Powercon in
16. 3-pin DMX in
17. 3-pin DMX out
18. Powercon out
p. 3

Publicidad

Tabla de contenido
loading

Tabla de contenido