HALOGEN BULBS
This range hood requires two halogen bulbs
(max 20W, 12V, TYPE MR16 bulb shielded,
GU 5.3 Base).
ALWAYS SWITCH OFF THE ELECTRICITY
SUPPLY BEFORE CARRYING OUT ANY
OPERATIONS ON THE APPLIANCE.
To change bulbs:
1. Loosen the ring nut by turning it
counterclockwise.
2. Pull the bulb downwards to remove - DO
NOT ROTATE.
CAUTION: BULB MAY BE HOT!
3. Replace with max 20W, 12V, TYPE MR16
bulb shielded, GU 5.3 Base halogen bulb.
FUSE REPLACEMENT
SWITCH OFF THE ELECTRICITY SUPPLY.
Remove the grease filters.
Remove the electrical box support and open the electrical box.
Replace with the same type of fuse (5x20mm, 4A, 125V).
FUSE/S
ELECTRICAL
BOX
BULB
- 13 -
RING NUT
ELECTRICAL
BOX
SUPPORT