Connections; Voltage Selector - Tascam 202 MKVII Manual Del Usuario

A
202MKVII (rear)
Amplifier
REC PLAY
(OUT) (IN)
TAPE/MD/CD-R
tuner, etc .
Connection example
14

Connections

B
C
Wall outlet
Speakers
V
Complete all other connections before turning
the unit on.
o Carefully read the manuals of the devices that you are connect-
ing and follow their instructions when making connections .
o Do not bundle connecting cables with power cords . Doing so
could cause noise .
o Connect all plugs completely .
A
Analog audio input/output (LINE IN/OUT) connectors
LINE IN (line inputs)
Connect these to the line output connectors of the amplifier or
the output connectors of the CD player or other device .
LINE OUT (line outputs)
Connect these to the tape/MD/CD-R, AUX or other input con-
nectors of the amplifier .
Refer to the connection diagram to the left .
B

Voltage selector

Use to switch the voltage to either 230 V or 120 V .
ATTENTION
The voltage selector is only available on units for specific markets .
IN USA/CANADA, USE ONLY ON 120V SUPPLY.
C
Power cord
After completing all other connections, plug the power plug
into a power outlet .
o Unplug the cord from the outlet when not using the unit for
a long time .
V
CAUTION
o Be sure to connect the power cord to an AC outlet that
supplies the correct voltage. Connection to an outlet that
supplies incorrect voltage could cause fire or electric
shock.
o Hold the power plug when plugging it into an outlet or
unplugging it. Never pull or yank on the power cord.