Tascam 202 MKVII Manual Del Usuario página 22

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

o When recording a mic, we recommend using headphones
for monitoring to prevent feedback .* If monitoring with
speakers, be sure to lower their output volume and keep the
mic away from them to prevent feedback .
*Feedback explanation
Feedback is when sound output from a speaker is picked up
by a mic and returned causing oscillation . This could cause
very loud noise that could even damage speakers .
o Silences can also be created (page  20) when recording
with mic input .
o When recording a mix of the line input sound and mic
input, the REC LEVEL (recording level) knob can be used to
adjust the volume after mixing .
Mixing tape playback when recording
You can mix in the sounds of TAPE 1 and input from a mic con-
nected to this unit when recording to TAPE 2 .
This unit does not support stereo mics.
Use a mono mic.
Connect the mic plug to the MIC connector on the front of the unit .
1
Load a cassette tape for playback into the
TAPE 1 compartment and a cassette tape for
recording into the TAPE 2 compartment.
2
Press the TAPE 1 play (y) button to start tape
playback. Then, turn the mic LEVEL knob to
adjust the balance between the playback and
mic sounds.
3
Press the TAPE 1 rewind (m) button and cue
the song to play.
4
Press the TAPE 1 stop (8) button to stop the
tape.
22
Mic mixing with recording (continued)
5
Follow step 2 for dubbing on page  23, and
start dubbing with mic mixing.
o When a mic is connected to the MIC connector on the front
of the unit, the tape playback level is lowered slightly . This is
to ensure enough headroom when the tape playback and
mic input sounds are combined .
o When playing a dubbed tape, the playback level will be
lowered slightly if a mic is connected to the MIC connector
on the front of the unit . When the mic is disconnected, the
playback level will return to normal .
o When recording a mix of the tape playback sound and mic
input, the REC LEVEL (recording level) knob cannot be used
to adjust the volume after mixing .
Enjoying karaoke with tape playback
Connect the mic plug to the MIC connector on the front of the unit .
1
Load a cassette tape for playback into the
TAPE 1 compartment.
2
Press the TAPE 1 play (y) button to start tape
playback. Then, turn the mic LEVEL knob to
adjust the balance between the playback and
mic sounds.
Sing along with the song .
o Use the PITCH CONTROL knob to adjust the pitch of the karaoke
backing track as necessary .
o Karaoke can also be enjoyed with TAPE 2 playback, but controlling
the pitch of the backing track is not possible when using TAPE 2 .
o When a mic is connected to the MIC connector on the front
of the unit, the tape playback level is lowered slightly . This is to
ensure enough headroom when the tape playback and mic
input sounds are combined while dubbing with mic mixing .
o The REC LEVEL (recording level) knob cannot be used to adjust
the volume after mixing .

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Tascam 202 MKVII

Tabla de contenido