Functions Settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item, then press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
• Refer to the INSTRUCTION MANUAL on the following website for the
detailed explanation of each item: <www.kenwood.com/cs/ce/>
[FUNCTION] menu items
[AUDIO CONTROL] : Sets your preferred audio settings.
: Sets your preferred control for the display window.
[DISPLAY]
[TUNER SETTING] : Settings for radio source.
: Settings for using a USB device.
[USB]
[BT MODE]
: Settings for using a Bluetooth device.
: Settings for using smartphone to control this unit.
[REMOTE APP]
[MIC GAIN]*
: Sets the sensitivity of the microphone.
[NR LEVEL]*
: Adjusts the noise reduction level.
[ECHO CANCEL]* : Adjusts the echo cancellation delay time.
[SYSTEM]
: Settings for this unit.
: Adjusts the clock.
[CLOCK]
[ENGLISH]
: Selects language for the menu and music information.
: Selects language for the menu and music information.
[РУССКИЙ]
[ESPANOL]
: Selects language for the menu and music information.
[FRANCAIS]
: Selects language for the menu and music information.
: Selects language for the menu and music information.
[DEUTSCH]
[DEMO MODE]
: Activates or deactivates the display demonstration.
* Applicable only while talking on the phone.
Examples of some well-used settings
1
.
2
3
4
5
6
7
Note:
You need to set [SWITCH PREOUT] to [SUBWOOFER] in standby mode before you
can make the above settings.
Subwoofer Level Setting
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
Turn the volume knob to select [SUBWOOFER SET], then press the knob.
Turn the volume knob to select [SW SET ON], then press the knob.
Turn the volume knob to select [SUB-W LEVEL], then press the knob.
Turn the volume knob to adjust the subwoofer level, then press the
knob.
Press and hold
to exit.
7