CONOR WRC ISO 4210 Manual De Instrucciones página 59

Assemble the tire
1. Place the tuve inside the tire.
2. Insert the valve through the tire hole.
3. Be placed the tube in the tire, insert the tire in the rim. Be sure to
assemble tube properly inside the tire and check it is not twisted
inside the tire.
4. Hold the valve while the tube is pumped up with specific pressure in
the tire side.
Pump up of the tire
Usually the tubes lose pressure because of the porous materials.
It is suggested to keep a suitable pressure of the tube. Check the
pressure with the pressure gauge.
There is a risk of burst with an insufficiented pressure of the tire.
EN
19