Technical Data; Ec Declaration Of Conformity - Trumpf quicksharp Manual De Instrucciones

8
quicksharp
2.1

Technical data

quicksharp
Workpiece:
Clamping diameter
Min. height
Max. height
Wheel motor:
Speeds
Voltages
Cycles
Power
Grinding wheel diameter
Grinding wheel height
Cutting speed
Workpiece speed
Feedrate
Regrind amount per grinding
operation
Dimensions
Weight
Hydraulic oil - container volume
Grinding coolant - container volume
Noise emission
2.2

EC Declaration of Conformity

as defined by EC Machinery Directive 89/392/EEC, Annex IIA
We herewith declare that the machine indicated below, owing to its
engineering concept and construction and the model as introduced on
the market, complies with the relevant essential safety and health
provisions stipulated in the EC directive.
This declaration shall lose its validity if any changes are made to the
machine without our authorization.
Machine designation:
Machine type:
Applicable EC directives:
Applied harmonized stan-
dards, in particular:
150 mm
25 mm
130 mm
2800 - 3360 min
200 - 265 V/350 - 460 V
50/60 Hz
1.1 kW
125 mm
23 mm
20 m/s
-1
40 min
0.1 mm/min
0 - 0.5 mm
600 x 600 x 1780 mm
300 kg
5 l
20 l
The typical A-effective sound level of the
unit is lower than 70 dB(A).
Tool Grinding Machine
quicksharp
EC Machine Directive 89/392/EEC;
91/368/EEC, 93/44/EEC
EC Low Voltage Directive
(73/23/EEC)
EC-EMC Directive (89/336/EEC)
EN 292-1, EN 292-2, EN 60 204-1,
EN 55022, EN 55014
Hans Klingel
Director of Development
TRUMPF GmbH + Co.
D-71254 Ditzingen
-1
B60E