For Your Safety - Trumpf quicksharp Manual De Instrucciones

Authorized application
Liability voided in the
event of unauthorized
application!
4
quicksharp
1.

For your safety

With the quicksharp you have at your disposal a grinding machine
which, in terms of safety, is state-of-the-art and safe in operation.
With the declaration of EC conformity and the CE label on the
machine, we confirm that the quicksharp complies with the relevant
regulations on occupational health and safety as stipulated in EC
Machinery Directive 89/392/EEC.
M a c h i n e N ° . 6 8 4 0 - H 3
Nameplate and CE marking
The nameplate, together with the CE marking, is affixed to the rear of
the machine.
Despite all these provisions, however, the machine may still represent
a source of danger if incorrectly operated by untrained personnel or if
used for unauthorized application.
In addition to the guidelines provided in this manual, the
general guidelines governing safety and accident prevention
must also be observed!
The quicksharp is designed for grinding dies, flat punches and
Whispertools.
Any application beyond and above this shall be construed as
unauthorized application. The manufacturer shall not be held liable for
any damages resulting therefrom; the entire risk rests solely with the
user.
2 0
1 , 7
1 6
Fig. 24072E
B60E