Publicidad
Lubrication point
Quantity
Hydraulic oil container
Grinding coolant
0.7 l /
container
20 l
(oil for grinding coolant)
B60E
5.5
Maintenance
5.5.1 Utilities
Recommended lubricant
5 l
ARAL Vitam GF 32 or Vitam DE 32
BP Energol HLP 32
CASTROL Hyspin AWS 32
ELF ELFOLNA HMD 32
ESSO TERESSO 32
FUCHS RENOLIN MR 10
MOBIL DTE 24 or 25
SHELL Tellus Oil DO 32 or DO 46
Henkel P3-MULTAN 41-3
CASTROL Syntilo 81-E
5.5.2 Maintenance intervals
Interval
Work to be done
After 8 h
•
Take the dirt bowl out of the rotary tool holder and rinse it out
•
Check the hydraulic oil and grinding coolant
•
Replace filter paper in coolant container as soon as filtration
effect diminishes
After 40 h
•
Clean the entire machine
•
Lubricate locating stop using a grease gun
After 160 h
•
Clean the grinding coolant container
•
Change the coolant, assure proper disposal of waste grinding
coolant
After 500 h/
•
Remove hood, raise the motor bridge and
half-yearly
lubricate ball bearings with slideway oil
•
Check the fittings on the pumps for proper seating
After 4000 h
•
Replace the hydraulic oil and bleed the system at
the throttle valve, assure proper disposal of waste oil
Designation
Viscosity
HLP/HLPD
ISO VG 32
DIN 51525
quicksharp
17
Publicidad
Capítulos
