Onkyo TX-8270 Manual De Instrucciones página 15

> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Supplementary Information | Others
5. Connect Other Cables (North American
models)
Antenna Hookup
Move the antenna around while playing the radio to find the
position with the best reception. Use a thumb tack or similar
b
to attach the FM indoor antenna to a wall.
Network Hookup
a
2
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy Network Functions such as
internet radio by connecting to the network. If you connect
by wired LAN, connect to the router with an Ethernet cable
to the ETHERNET port as shown in the illustration. To
connect by Wi-Fi, after selecting "Wireless" in "2. Network
Connection" (P17) in Initial Setup, select the desired setting
method and follow the onscreen instructions to configure
d
the connection.
Power Cord Hookup
This model includes a removable power cord. The power
cord must be connected only after all other connections are
completed. Make sure you first connect the power cord to
AC INLET of the unit and then connect to the outlet. Always
disconnect the outlet side first when disconnecting the
power cord.
c
a FM indoor antenna, b AM indoor antenna, c Ethernet cable, d Power cord
15
En