Technical Data; Disposal - Silvercrest SBB 850 A1 Instrucciones De Uso

Baking moulds and kneading paddles
The surfaces of the baking moulds ¶ and knea-
ding paddles ² have a non-stick coating. When
cleaning the appliance do not use aggressive
detergents, cleaning powders or objects that may
cause scratches to the surfaces.
Due to moisture and vapours the surfaces of
various parts may undergo changes in their appea-
rance over a period of time. This has no influence
on the function nor does it reduce the quality of the
baking results.
Before cleaning, take the baking moulds ¶ and
kneading paddles ² out of the baking area. Wipe
the outside of the baking moulds ¶ with a damp
cloth.
Important!
Never submerse the baking mould ¶ in water or
other liquids.
Clean the interior areas of the baking mould ¶ with
warm soapy water.
If the kneading paddles ² are encrusted and it is
difficult to dissolve, fill the baking mould ¶ with hot
water for approx. 30 minutes.
If the mountings of the kneading paddles ² are
clogged, you can clean them carefully with a wooden
toothpick.
Do not use any chemical cleaning agents or solvents to
clean the Bread Baking Machine.

Technical data

Model:
Nominal voltage:
Power consumption:

Disposal

Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
- 71 -
Bread Baking Machine
SBB 850 A1
220-240 V ~ / 50 Hz
850 Watt