Location And Function Of Parts And Controls - Sony GXD-L65H1 Manual De Instrucciones

Location and Function of Parts and Controls

Front
Parts
1 Sony logo
2 (Power/Stand by)
indicator
Remote control sensor
3
4 Light Sensor
Description
The Sony logo lights up.
On the menu screen, you can change the logo position in a vertical or horizontal direction.
When this unit is purchased, the position is automatically detected and the logo set to light
up. See "Logo" on page 33.
Note
If you will not change the installation orientation, set "Position" of "Logo" to
"Landscape" or "Portrait" as appropriate. The orientation sensor may not work correctly
if subjected to vibration or shock.
• Lights up in green when the display is switched on.
• Lights up in red when the display is in standby mode. Lights up in orange when the
display enters the power saving mode while a signal is input from a PC.
When the indicator blinks in red, see page 40.
Note
When the "LED" option in the "Multi Display" settings is set to "Off" and the "Position"
option is not set to the right-bottom, the indicator does not light up in green even when the
display is turned on, except for the case of no signal or an unsupported signal.
Remote control light receptor.
This is the sensor for automatically adjusting the brightness of the screen. See page 34.
Note
Do not place any object in front of the light sensor. Doing so may prevent the automatic
brightness adjustment function from working.
GB
9
GB