Connecting The Speakers - Sony GXD-L65H1 Manual De Instrucciones

Ocultar thumbs Ver también para GXD-L65H1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 184
4
Attach the terminal cover and cable cover
to the display.
When using in a location that requires compliance
with international standard IP54, always attach
the terminal cover and cable cover.
Note
When securing the cover, tighten the screws evenly. If
using an electric screwdriver, set the torque within the
range of 0.8 N·m to 1.0 N·m (8 kg·cm to 10 kgf·cm).
Terminal cover
Cable cover
20
GB
Connecting the
Speakers
Connect SS-SPG02 speakers (not supplied). To
connect, use the following speaker cords included
with the speakers.
Speaker cord (with terminal cover)
• The lengths of the left and right speaker cords are
different. The shorter cord is for the left speaker and
the longer cord is for the right speaker. Check the
labels on the back of the speakers in order to
connect them correctly.
• When using in a location that requires compliance
with international standard IP54, always attach the
terminal cover.
• For more details on connecting the speakers, see the
instruction manual that came with the speakers. For
details on how to route the speaker cords, see page
21.
Note
When setting the display vertically, the speaker does not
comply with international standard IP54.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido