On Cleaning The Projection Window And The Cabinet - Sony VPL-PHZ10 Manual De Referencia

Ocultar thumbs Ver también para VPL-PHZ10:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 70
On Installation
• When installing the unit, leave space
between any walls, etc. and the unit
as illustrated.
More than 50 cm (19
More than
50 cm
11
(19
/
")
16
• Avoid using the unit in a location
where the temperature or humidity is
very high, or temperature is very low.
• Avoid installing the unit in a location
subject to direct cool or warm air
from an air-conditioner. Installing in
such a location may cause
malfunction of the unit due to
moisture condensation or rise in
temperature.
• Avoid installing the unit in a location
near a heat or smoke sensor.
Installing in such a location may
cause malfunction of the sensor.
• Avoid installing the unit in a very
dusty or extremely smoky
environment. Otherwise, the air filter
11
/
")
16
More than
50 cm
11
(19
/
")
16
will become obstructed, and this
may cause a malfunction of the unit
or damage it.
• When using the unit at an altitude of
1,500 m or higher, set "High Altitude
Mode" to "On" in the Installation
menu. Failing to set this mode when
using the unit at high altitudes could
have adverse effects, such as
reducing the reliability of certain
components.
• Set "Installation Attitude" on the
Installation menu correctly to suit to
the Installation angle. Continuing to
use the wrong setting may affect
component reliability.
On cleaning the projection
window and the cabinet
• Be sure to disconnect the AC power
cord from the AC outlet before
cleaning.
• If you rub on the unit with a stained
cloth, the cabinet may be scratched.
• If the unit is exposed to volatile
materials such as insecticide, or the
unit is in contact with a rubber or
vinyl resin product for a long period
of time, the unit may deteriorate or
the coating may come off.
• Do not touch the projection window
with bare hands.
• On cleaning the projection window
surface:
Wipe the projection window gently-
with a soft cloth, such as a glass
cleaning cloth. Stubborn stains may
be removed with a soft cloth lightly
dampened with water. Never use
solvent such as alcohol, benzene or
thinner, or acid, alkaline or abrasive
detergent, or a chemical cleaning
cloth.
9
GB
Precautions

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vpl-pwz10

Tabla de contenido