Cleaning The Air Filter - Sony VPL-PHZ10 Manual De Referencia

Cleaning the Air Filter

When the message on cleaning the air
filter is displayed on the projected
image, clean the air filter.
If the dust cannot be removed from
the air filter even after cleaning,
replace the air filter with a new one.
For details on a new air filter, consult
with qualified Sony personnel.
Caution
If you keep using the projector even
after the message is displayed, dust
may accumulate, clogging it. As a
result, the temperature may rise
inside the unit, leading to a possible
malfunction or fire.
1
Turn off the projector, and
disconnect the AC power cord
from the AC outlet.
Note
If you remove the side cover while
the AC power cord is not removed
from the AC outlet and power is not
turned off, you may touch the fan
inside the unit, resulting in injury.
2
Loosen the screws (three) on the
side cover.
Side cover
3
Lift up the bottom of the side
cover to remove.
Cleaning the Air Filter
Side cover
21
GB