Re-Pairing The Transmitter And The Headset - Sony DR-BT101iK Manual De Instrucciones

Re-pairing the transmitter and the headset

1
Turn on the power of iPod.
(Make sure the iPod is in pause mode.)
2
Connect the transmitter to the iPod (page 15).
3
Place the transmitter and the headset to be paired together
within 1 m (3 ft).
4
Press and hold the PAIRING button for 2 seconds or more to enter
standby for pairing while the headset is turned off.
The headset indicators (blue and red) flash together and the headset
enters into pairing mode.
5
Press and hold the power button of the transmitter for about 7
seconds or more to enter "pairing mode."
After about 1 second, the transmitter indicator will flash twice, but
keep pressing the power button.

Continued

US