Re-Pairing The Transmitter And The Headset - Sony DR-BT22iK Manual De Instrucciones

Re-pairing the transmitter and the headset

1
Turn on the power of iPod.
(Make sure the iPod is in pause mode.)
2
Connect the transmitter to the iPod (page 16).
3
Place the transmitter and the headset to be paired together
within 1 m (3 ft).
4
Press and hold the POWER button of the headset for about 7
seconds or more to enter "Pairing in process" while the headset is
turned off .
Aft er about 3 seconds, the headset indicator (red) and the
headset indicator (blue) will fl ash twice, but keep pressing the
POWER button.
Release the POWER button when the headset indicator starts
fl ashing quickly. Th e headset enters the pairing process.
5
Press and hold the power button of the transmitter for about 7
seconds or more to enter "Pairing in process."
Aft er about 1 second, the transmitter indicator will fl ash twice,
but keep pressing the power button.

Continued
GB 27