OHAUS Ranger 1000 Serie Manual De Instrucciones página 6

EN-4
Verify that the AC Adapter's input voltage range and plug type match
the local AC power to be used.
Do not position the scale such that it is difficult to disconnect the
power cord from the power receptacle.
Make sure that the power cord does not pose a potential obstacle or
tripping hazard.
Operate the equipment only under ambient conditions specified in
these instructions.
Do not operate the equipment in hazar
This scale is for indoor use only.
Use the scale in dry locations only.
Do not drop loads on the pan.
Use only approved accessories and peripherals.
Disconnect the equipment from the power supply when cleaning.
Service should only be performed by authorized personnel.
Ranger 1000 Series
dous or unstable environments.