Functional Description - Milwaukee 2505-20 Manual Del Operador

Taladro destornillador de instalación m12 fuel 10 mm (3/8")

Ocultar thumbs

Contenido

página de 17

/ 17
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

cidentally occurs, flush with water. If liquid con-

tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged

or modified. Damaged or modified batteries may ex-

hibit unpredictable behavior resulting in fire, explosion

or risk of injury.

• Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging im-

properly or at temperatures outside the specified range

may damage the battery and increase the risk of fire.

SERVICE

• Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES

FOR DRILL

• Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory or fasteners may contact hidden wir-

ing. Cutting accessory or fasteners contacting a "live"

wire may make exposed metal parts of the power tool

"live" and could give the operator an electric shock.

Safety instructions when using long drill bits

•Never operate at higher speed than the maximum

speed rating of the drill bit. At higher speeds, the

bit is likely to bend if allowed to rotate freely without

contacting the workpiece, resulting in personal injury.

• Always start drilling at low speed and with the bit

tip in contact with the workpiece. At higher speeds,

the bit is likely to bend if allowed to rotate freely without

contacting the workpiece, resulting in personal injury.

• Apply pressure only in direct line with the bit

and do not apply excessive pressure. Bits can

bend causing breakage or loss of control, resulting in

personal injury.

•

To reduce the risk of injury in ap-

WARNING

plications that produce a consider-

able amount of dust, use an OSHA compliant dust

extraction solution in accordance with the solu-

tion's operating instructions.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry impor-

tant information. If unreadable or missing, contact a

MILWAUKEE service facility for a free replacement.

•

Some dust created by power sanding,

WARNING

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

filter out microscopic particles.

SPECIFICATIONS

Cat. No. ..................................................... 2505-20

Volts .............................................................. 12 DC

Battery Type .................................................M12™

Charger Type ................................................M12™

No Load RPM ...................LO 0 - 400, HI 0 - 1600

Capacities

Steel ............................................................... 3/8"

Wood

Flat Bit ........................................................... 1"

Auger Bit .................................................. 1-1/4"

Hole Saw ................................................. 1-1/8"

Screws (dia.)............................................... 3/8"

Recommended Ambient

Operating Temperature ......................0°F to 125°F