Yamaha CDX-596 Manual De Instrucciones página 19

Notes
● In step 4, you can check the program data for side A and side
B.
CDX-596
1
PROGRAM
CDX-496, CDX-396
1
PROGRAM
A TOTAL
4
1
Shows the number of tracks programmed on each side
right after the programming is finished. It is then replaced
by the number of the first programmed track on side A.
2
Shows the programmed track numbers on each side.
3
Shows the total time of programmed tracks on each side.
4
Shows the side of the tape.
2 3 4
1 2 3 4 5 A
3
2
● All tracks may not be programmed if the tape's length is not
enough. To program all tracks, use a tape that is longer than
the actual playing time.
● To check, cancel or correct program data, refer to page 15.
* When checking program data, note that "PAUSE" or "Pu"
appears between track numbers for side A and side B.
● Up to 40 tracks can be programmed. A pause inserted between
side A and B is counted as one track.
● CD synchronized recording function can be used if your tape
deck is compatible with it. If so, in step 5 and 6, press
SYNCHRO and then press
Recording automatically begins. (For details, refer to page 21.)
on this unit's remote control.
E-
17