Remote Control - Yamaha BD-A1020 Manual De Instrucciones

Controls and functions

■ Remote control

Note
– will appear on the top left corner of the screen
when the pressed button is not available.
1
2
3
PROGRAM MARKER
4
R
5
6
CLEAR
7
PIP
8
9
2ND
AUDIO
0
TOP MENU
RETURN
A
NETFLIX
STATUS
B
PURE DIRECT SA-CD/CD
C
D
8
En
E
F
G
DIGEST ZOOM
G Y B H
I
SUBTITLE
J
ANGLE
K
AUDIO
L
M
SEARCH
SHUFFLE
N
SETUP REPEAT
O
HOME A B
POP-UP MENU
ENTER
ON SCREEN
PAGE
BDP122
P
1 Infrared signal transmitter: Outputs infrared
signal. Aim this window to the remote control sensor
(p. 7).
2 MARKER
VIDEO
DVD
a specified point of a movie. After Bookmark is set, to
select the set point you want to jump to, press
DIGEST. You can set up to 12 Bookmarks.
3
: Opens/closes the disc tray.
4 PROGRAM
DVD CD
(p. 28). You can set up to 15 tracks (for an audio disc)
or titles/chapters (DVD-Video).
5 Number buttons: Enters numbers, or during
playback, jumps to the track/chapter corresponding to
the number you input. These buttons may not be
available depending on the disc type and playback
condition.
6 CLEAR: Clears entered number/set item.
7 PIP
BD : Turns on/off the Picture in Picture (p. 29).
PIP Mark ( ) is displayed on the screen when this
function is available. You can also select this item from
On Screen menu (p. 26).
Note
– PIP Mark is displayed only when the PIP Mark is set
to on (p. 34).
8 SETUP: Displays SETUP menu screen (p. 30).
9 2ND AUDIO
BD : Selects the secondary audio of the
Picture in Picture (p. 29) or audio commentaries. The
Secondary Audio Mark (
screen when this function is available (p. 37). You can
also select this item from On Screen menu (p. 26).
Note
– Secondary Audio Mark is displayed only when
Secondary Audio Mark is set to on (p. 34).
0 HOME: Displays the HOME menu screen (p. 20).
A NETFLIX: Starts Netflix (p. 23).
B STATUS: Displays the playback information (p. 27).
C PURE DIRECT: Changes Pure Direct mode. Pure
Direct mode shown below will change each time you
press the button. Pure Direct mode improves audio
quality. PURE DIRECT on the front panel lights up
when Pure Direct mode is set to mode 1/mode 2.
Mode 1: Front panel display is turned off, and video
signals are not output. This mode is suitable listening
audio.
Mode 2: Front panel display is turned off, and video
signals from other than HDMI terminal are not output.
This mode is suitable for watching movies with high
quality sound.
off: Normal play back.
: Sets Bookmark (p. 28) at
: Sets the order of playback
) is displayed on the