Maxon C2 Manual De Instrucciones página 12

INSTALL LIFTGATE - UPPER MOUNTS - Continued
1. Ensure liftgate is level as shown in
FIG. 9-2.
2. Insert 1/2"-13 x 2-1/2" long bolt with fl at
washer (Kit items) through mounting
ear (FIG. 12-1) on top of RH and LH
columns.
3. On the back of each column, use 1/2"-
13 lock nut (Kit item) to secure top
of mounting strap (Kit item) to corner
post (FIG. 12-1). Position the bottom of
each strap to the fl oor.
4. Use bottom hole of the strap, as a tem-
plate to drill hole for 1/2"-13 bolt, through
the fl oor of the truck body (FIG. 12-1).
5. Bolt the bottom of each strap to the fl oor
of the truck body with 1/2"-13 bolt and
1/2"-13 lock nut (Kit items) (FIG. 12-1).
LIFT CORPORATION Sht. 12 of 36 DSG#
1/2"-13 X
2-1/2" LG BOLT
(2 PLACES)
1/2"-13
LOCK NUT
(2 PLACES)
BOLTING ON UPPER MOUNTS
(STAKE/FLAT BED SHOWN)
M-14-34
Rev. A Date: 03/03/17
1/2"-13
LOCK NUT
MOUNTING EAR
(2 PLACES)
(2 PLACES)
MOUNTING STRAP
(2 PLACES)
FIG. 12-1
1/2" FLAT
WASHER
(2 PLACES)
1/2"-13 X
2-1/2" LG
BOLT
(2 PLACES)
RH COLUMN