Mounting The Rear Wheels (If Available); Unfolding The Wheelchair; Mounting Or Removing Of The Footrests - Vermeiren Jazz S50 Manual De Instrucciones

2.2

Mounting the rear wheels (if available)

2.3

Unfolding the wheelchair

L
CAUTION:
Risk of clamping – Keep fingers away from moving parts of the
wheelchair.
1. Position yourself behind the wheelchair.
2. Use the handgrips to open the wheelchair as much as possible.
3. Position yourself at the front of the wheelchair.
4. Push both seating tubes down till they are fixed in their position.
2.4

Mounting or removing of the footrests

L WARNING:
Risk of injury – Check that the footrests are securely locked in
place before use.
L CAUTION:
Risk of clamping – Keep objects away from the footrests swing
range while mounting or removing the footrests.
1. Take the rear wheel and push on button
2. Keep the button pushed in and mount the rear
wheels axle till it stops.

3. Release the button
4. Check that the wheel is secured.
The mounting of the footrests is done as follows:
1. Hold the footrest sideways at the outside of the
wheelchair frame and mount the tube hood
into the frame.
2. Swing the footrest inwards till it clicks in
position.
3. Swing the footplate downwards.
To take off the footrests:

1. Pull lever .
2. Swing the footrest to the outside of the
wheelchair till it comes loose from the guidance.
3. Pull the footrest from tube hood
Page 7
Jazz S50
2018-07

.
.

.
